SIKA Dr.Siebert & Kühn GmbH & Co.KG
6.7 Description of the step test mode
For a detailed description of the temperature step program, please refer to chapter 6.5.5.
The step test can be performed with and without probe.
The following can be used as probes:
RTD
resistance
thermometer
TC
thermocouples
mA temperature transmitter
To call up the step test mode
without probe
, you have to select the "Select Stufen“ (Select levels)
submenu (refer to chapter 6.5.5) in Select mode and activate it.
To call up the step test mode
with probe
, you have to select the desired probe in Select mode.
Selection of the probe is described in the submenus "Select RTD“ (chapter 6.5.1), Select TC (chapter
6.5.2) and Select mA (chapter 6.5.3). Thereafter, the “Select steps” submenu (refer to chapter 6.5.5)
must be selected and activated.
Fig. 20: Step test mode
