SIKA Dr.Siebert & Kühn GmbH & Co.KG
6.5.6 Datalogger menu
The menu option DataLogger appears only in the list of select mode (fig. 9), if you selected a test probe (cap.
6.5.1 until 6.5.3).
Thereafter select DataLogger from the select menu with the cursor key and confirm it with the select key. It
appears the submenu select logger.
With the help of DataLogger you save the temperature values automatically in the step test (actual value and
set point) and you can read off here either directly or appropriate for a PC download.
You have the possibility to admit up to 6 values per calibration and to save all together 8 calibrations (set 1
until 8).
You make the selection with the cursor keys. The activation / deactivation takes place with the select key.
Fig. 15: Submenu select logger
OFF/ON
Here you can switch the DataLogger on respectivley off.
As long as the DataLogger stands on OFF, you can make changes (e. g. selection of another memory).
set 1...8
Here you can select the memory set 1...8 in which the calibration values are saved. They are presented until
they are deleted by CL.
Attention!
Saved values of calibration are overwritten with repeated selection of the memory.
CL
With this selection you delete the saved values you have put in the selected memory.
actual temp/set temp
Here are indicated the actual and being produced in the step test. Those with „
√
“ characterized values
correspond to those selected in the step test.
date/starting time/probe
Indication of date, time and the selected test probe. These indications are also specified on the inspection
record.
Operation steps DataLogger
Select a test specimen (cap. 6.5.1 until 6.5.3).
