SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
93
Egress Mode: To specify whether egress traffic is normal or unmodified. “normal” means
that the tag that egress traffic carries will compare with its PVID. If the tag and PVID are
identical, the egress traffic will be forwarded untagged. If the tag and PVID are different,
egress traffic will be forwarded with a PVID. Specifying “un-modify” when you would like
egress traffic to stay intact. In other words, frames that are tagged will stay tagged; frames
that are untagged will stay untagged.
SVID: To specify a service provider VLAN ID to each port. The range of SVID is between 1
and 4094.
Server Port: Tick the checkbox if you would like the port to become a server port.
4.3.9.2 802.1q Tag VLAN Member
Select the option 802.1q Tag VLAN Member from the VLAN Configuration menu and then
the following screen page appears.
This Managed Switch supports up to 128 sets of VLANs.
Name: Enter a descriptive name up to 15 characters for this 802.1q VLAN entry.
VID: Specify a VID for this VLAN entry (1~4094).
Member Port: Tick the checkbox on ports that you would like them to become a member of
this entry. By default, all ports are a member of Default VLAN with VID 1.
By default, every port belongs to Default VLAN called VLAN 1. You can delete the Default
VLAN only when your PVID is not the same as VLAN 1.
4.3.9.3 802.1q Service VLAN Member
Select the option 802.1q Service VLAN from the VLAN Configuration menu and then the
following screen page appears.
