SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
49
<mirror_port_list>: Enter a range of port
number (1~26 or 1~28) or enter “0” to disable
port mirroring function.
For example:
SWH(config-mirror)# port 1-4,10-15,18,19
target-port <target_port | disable> Specify the preferred target port for mirroring.
<target_port | disable >: Enter a port number
(1~26 or 1~28) or specify “0” or “disable” to
turn this function off.
For example:
SWH(config-mirror)# target-port 24
exit
Quit the current mode and return to
Configuration mode.
show
Show current mirror settings.
2.6.7 MVR command mode
Enter the mvr command in Configuration mode. Then, the mvr mode shows as follows:
SWH(config)# mvr
SWH(config-mvr)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
<vid> Edit MVR <vid>
mode Set Mode mode <enable|disable>
add Add MVR add <vid> <receive> <source>
delete Delete MVR del <vid>
group Enter Group Cmd. Mode group
exit Exit from current mode exit
show Show MVR Settings show
SWH(config-mvr)#
Prompt
Command &Parameter
Description
mode <enable | disable>
To enable or disable MVR global settings.
For example:
SWH(config-mvr)# mode enable
SWH(config-mvr)#
add <vlan_id> <rec_port_list>
<sor_port_list> <server_ip>
To add a MVR VLAN ID and specify its
Receive and Source Port.
<vlan_id>: 1~4094
<rec_port_list>: Switch ports that receive
multicast data are specified as receiver ports.
Specify a port number or a range of port
numbers (1~26 or 1~28).
<sor_port_list>: Uplink ports resided in
multicast VLAN and send and reecive
multicast data are selected as source ports
(1~26 or 1~28). Please note that the source
ports specified here should be router ports as
well. Refer to IGMP command mode section
for detailed explanations on setting up router
ports.
<server_ip>: Specify the media server IP
