SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
35
For example:
SWH(user_username)# state enable
password<password>
Set up a password for this user account.
<password>: Enter the password for this
user account of up to 20 alphanumerical
characters.
description <description>
Enter the description for this user account.
<description>: Enter the description for this
user account of up to 35 alphanumerical
characters.
ip <enable | disable>
To enable or disable IP security function of
this user account.
ip_addr <ip_addr>
Enter the IP address for IP security function.
<ip_addr>: Enter the IP address.
level <administrator |
read_and_write | read_only |
access_denied>
Set up the console level for this user
account.
<administrator | read_and_write |
read_only | access_denied>: Four
operation privileges are available in the
Managed Switch.
NOTE: If you would like to edit the settings
of a user account, you can enter the
command user user id under the SWH#.
For example:
If you want to edit settings of the user
account “mis2”, you can use the following
commands to enter the editing mode.
SWH#user mis2
SWH(user_mis2)#
