SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
81
4.3.1 Switch Configuration
Click the option Switch Configuration from the Switch Management menu and then the
following screen page appears.
Max Frame: Select the maximum transmitting and receiving frame size from the pull-down
menu. When the Managed Switch transmits or receives a frame larger than the specified
value, it will be discarded.
4.3.2 Port Configuration
Click the option Port Configuration from the Switch Management menu and then the
following screen page appears.
Click the “Edit” button on the port that you would like to modify.
Click the “Change” button after you set up new configurations. Newly-configured settings
will appear in the table below.
Port Number: View-only field that shows the port number that you would like to edit.
Port Media: Select copper or fiber as the preferred media type. For port 1~24, the only
option available is copper. However, for port 25~26, you can select either copper or fiber as
your preferred media type.
Port State: Enable or disable the current port state.
Port Type: Select Auto-Negotiation or Manual mode as the port type.
