SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
31
show
Show each trap’s (1~10) detailed settings.
state <enable | disable>
To enable or disable this trap destination.
For example:
SWH(snmp-trap-dest_trap id)# state enable
destination <ip_addr>
Specify the IP address of this trap destination.
<ip_addr>: Enter the trap destination IP
address.
community<community>
Enter the community name.
<community>: Enter the community name of
up to 20 characters.
exit
Quit the Trap ID mode and return to SNMP
service mode.
SWH(snmp-trap-
dest_
trap id)
#
show
Show this Trap’s state, destination, and
community information.
port-link <enable | disable>
To enable or disable the Managed Switch to
send port Link Up or Link Down trap.
power-down <enable | disable>
To enable or disable the Managed Switch to
send port power-down trap.
all <enable | disable>
To set up all functions above to enabled or
disabled. When “enabled” is set, a trap notice
will be sent when a certain situation occurs.
exit
Quit the Trap mode and return to SNMP service
mode.
SWH(snmp-trap-
mode)#
show
Show Trap mode information.
mode < enable | disable>
To enable or disable Web service on the
Managed Switch.
For example:
SWH(service-web)# mode enable
exit
Quit the Web service mode and return to the
service mode.
SWH(service-
web)#
show
Show Web service information.
2.5.7 System command mode
Enter the system command in Enable mode. Then, the system mode shows as follows:
SWH# system
SWH(system)#
Command
Purpose & Description
Usage
=================== =========================== =============================
company Set Company Name company <name>
syscontact Set System Contact syscontact <contact>
sysname Set System Name sysname <name>
syslocation Set System Location syslocation <location>
hostname Set System Host Name syshostname <hostname>
exit Exit from current mode exit
show Show System Settings show
SWH(system)#
Prompt
Command & Parameter
Description
company <company_name>
Specify a company name of up to 55
alphanumeric characters.
SWH(system)#
syscontact <system_contact>
Enter contact information for this Managed
Switch of up to 55 alphanumeric characters.
