SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
24
2.4 User Mode
When the Managed Switch is turned on, the boot-up message will be displayed first and
then followed by username and password prompt. The default login username is admin and
no password is required for default setting, thus press Enter key in password prompt. When
system prompt shows “SWH>”, it means that the user has successfully entered the User
mode.
NOTE: It is strongly recommended that you add a new username account and password
using User command in Enable mode or change the default password for security reasons.
When you create a new login username and password with administrator operation
privilege, you can delete the default username (admin) account to prevent or restrict
unauthorized access.
Boot-up message
Default username: admin and without the password
In “SWH>”, enter the question mark (?) to show all commands available for User mode. The
screen shows as follows:
Command
Purpose
enable
Enter the Enable mode.
exit
Quit the User mode.
help
Display a list of available commands in User mode.
history
Display a list of commands that have been entered.
logout
Logout from the Managed Switch.
ping
Allow users to ping a specified network device.
show
Show a list of commands or show the current setting of each listed command.
2.5 Enable Mode
The only place where you can enter Enable mode is in User mode. Enter the enable
command after the prompt “SWH>” and enter your login password (By default, there is no
password required.). When you successfully enter Enable mode, the prompt will be changed
to “SWH#”. Press ? to view a list of commands available for use.
