SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
26
2.5.2 Console command mode
Enter the console command in Enable mode. Then, the console mode shows as follows:
SWH# console
SWH(console)#
Command
Purpose & Description
Usage
=================== =========================== =============================
time-out Set Time Out time-out <secs>
exit Exit from current mode exit
show Show Console Settings show
SWH(console)#
Prompt
Command &Parameter
Description
time-out <secs>
To disconnect the Managed Switch when the
user is inactive.
<secs>: 0 or 5-9999 seconds. “0” means that the
Managed Switch will never be disconnected.
For example:
SWH(console)# time-out 300
exit
Exit the current mode and return to Enable Mode.
SWH(console)#
show
Show time-out setting.
2.5.3 IP command mode
Enter the ip command in Enable mode. Then, the ip mode shows as follows:
SWH# ip
SWH(ip)#
Command
Purpose & Description
Usage
=================== =========================== =============================
type Set Type type <manual|dhcp>
address Set IP Address address <ip> <mask> <gw>
exit Exit from current mode exit
show Show IP Settings show
SWH(ip)#
Prompt
Command & Parameter
Description
type <manual | dhcp>
Specify whether the IP address is manually assigned
or automatically assigned from the DCHP server.
When “DHCP” is specified and a DHCP server is
also available on the network, the Managed Switch
will automatically get the IP address from the DHCP
server. If “Static IP” is selected, users need to
further specify the IP address, Subnet Mask and
Gateway.
NOTE: This Managed Switch also supports auto-
provisioning function that enables DHCP clients to
automatically download the latest Firmware and
configuration image from the server. For information
about how to set up a DHCP server, please refer to
APPENDIX A
.
SWH (ip)#
address <ip> <mask> <gw>
Enter the IP address, subnet mask and gateway of
