SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
17
2.3.3 General Commands
This section introduces you some general commands that you can use in User, Enable, and
Config mode, including “help”, “exit”, “history”, “logout”, and “show”.
Entering the command…
To do this…
Enter the “help” command
Obtain a list of available commands in the current
mode.
Enter the “exit” command
Return to the former mode or login screen.
Enter the “history” command
List all commands that have been entered.
Enter the “logout” command
Logout from the CLI. (“logout” can not be used in
Configuration mode.)
Enter the “show” command
Show system information.
Show available commands.
Show a command’s current settings.
Show currently-configured settings.
2.3.3.1 Show command
In this Managed Switch, show command can be used in every mode that is useful and
convenient for users to view displayed information without leaving the current mode. By
issuing the combination of show command and adequate parameters, show command can
provide different information for users not only to verify configurations and troubleshoot the
problems, but also to monitor the current operation status. The following explains how show
command can be used in this Managed Switch.
Show system
When you enter “show system” command in each mode, you will be informed of system
information. The following screen page shows a sample of system information in User
mode.
Company Name: This shows the company name or related information.
System Object ID: This shows the predefined System OID.
System Contact: This shows the system contact information.
