SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
38
or in-port<any | 1-28>
<any | 1-26>: Specify “any” to denote any ports
are ingress ports or specify a port number.
For example:
SWH(config-acl_100)# in-port any
frame-type <any | ethernet | llc |
other>
Set up which frame type applies to this rule.
<any
| ethernet | llc | other>: Four frame types
are available for selection.
Any: Specify “any” to denote any frame types.
Ethernet: Specify “ethernet” to denote the
frame type that conforms to 802.3 Ethernet
standard.
LLC: Specify “llc” to denote Logical Link Control
or SNAP frames (RFC 1042).
Other: Specify “other” to denote other control
values except LLC frames.
source-mac <any |
xx:xx:xx:xx:xx:xx>
Set up which source MAC address applies to
this rule.
<any | xx:xx:xx:xx:xx:xx>: Specify “any” to
denote all MAC addresses or type a specific
source MAC address in AA:AA:AA:AA:AA:AA
format.
For example:
SWH(config-acl_100)# source-mac any
dest-mac <any |
xx:xx:xx:xx:xx:xx>
Set up which destination MAC address should
apply to the rule.
<any | xx:xx:xx:xx:xx:xx>: Specify “any” to
denote all MAC addresses or type a specific
destination MAC address in
AA:AA:AA:AA:AA:AA format.
For example:
SWH(config-acl_100)# dest-mac any
ether-type <any | 0000-FFFF>
Configure the Ethernet type.
<any | 0000-FFFF>: Specify “any” to denote
any Ethernet type or specify Ethernet type value
in hexadecimal notation.
For example:
SWH(config-acl_100)# ether-type 0800
vid <any | 1-4094>
Configure traffic from which VLAN resides in.
<any | 1-4094>: Specify “any” to denote traffic
from any VLAN or specify an existing VID to
denote source traffic from this specified VLAN.
For example:
SWH(config-acl_100)# vid 200
ipv4 <any | enable | disable>
To enable or disable IPv4 traffic to pass
