SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
43
Prompt
Command & Parameter
Description
server <ip_addr>
Specify IP address for an external RADIUS
authentication server.
<ip_addr>: Specify RADIUS Authentication
server IP address.
secret <shared_secret>
The identification word or number assigned to
each RADIUS authentication server with which
the client shares a secret. Notice that the
Managed Switch and authentication server must
have the same secret.
<shared_secret>: Specify a shared secret of up
to 30 alphanumerical characters.
maxquery <1-16>
Specify the maximum number of authentication
attempts between 1 and 16. Users who fail to
authenticate will not grant access to the switch.
When the authentication attempts reach the
specified number and all fail, the authentication
server will not allow users to authenticate for a
period of time.
<1-16>: Specify the maximum numbers of
authentication attempts between 1 and 16.
For example:
SWH(config-dot1x-sys)# maxquery 5
type <port_list> <manual | auto>
Set up the reauthentication type.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12.
<manual | auto>: Specify “manual” to allow
clients to re-authenticate with the RADIUS
server manually. Specify “auto” to enable clients
to re-authenticate with the RADIUS server
automatically.
For example:
SWH(config-dot1x-sys)# type 1-4,10-15,18,19
auto
period <reauth_period>
Set up how often a client should re-authenticate
with the RADIUS server. This is used to set up
how often a client is able to re-authenticate with
the RADIUS server after they use up the
maximum authentication attempts.
<reauth_period>: 10-3600 seconds
eap-timeout <eapol_timeout>
The time that the Managed Switch waits for
responses from the server host to an
authentication request.
<eapol_timeout>: 10~255 seconds
exit
Quit the current mode and return to SWH
(config-dot1x)#.
SWH(config-
dot1x-sys)#
show
Show or verify current dot.1X configurations.
