SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
48
<mac-addr>: Specify the MAC address that
applies to this rule.
<vlan_id>: Specify a VLAN ID (1~4094) that
this port belongs to.
<port | filter>: For 26-port Managed Switch,
enter the forwarding port number 1~26 or
specify “filter” or “27” to filter packets. For 28-
port Managed Switch, enter the forwarding
port number 1~28 or enter 29 to filter packets.
For example :
SWH(config-mac-static)# add xx-xx-xx-xx-xx-
xx 4094 24
SWH(config-mac-static)# add xx-xx-xx-xx-xx-
xx 4094 filter
delete <mac-addr> <vlan_id> <port
| filter>
Delete a MAC address setting from the
forwarding or filtering table.
<mac-addr>: Specify the MAC address that
you would like to delete.
<vlan_id>: 1~4094
<port | filter>: For 26-port Managed Switch,
enter the forwarding port number 1~26 or
specify “filter” or “27” to filter packets. For 28-
port Managed Switch, enter the forwarding
port number 1~28 or enter 29 to filter packets.
For example :
SWH(config-mac-static)# delete xx-xx-xx-xx-
xx-xx 4094 24
SWH(config-mac-static)# delete xx-xx-xx-xx-
xx-xx 4094 filter
exit
Quit the current mode and return to
Configuration mode
show
Show current static settings.
2.6.6 Mirror command mode
Enter the mirror command in Configuration mode. Then, the mirror mode shows as follows:
SWH(config)# mirror
SWH(config-mirror)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
port Set Port port <port_list>
target-port Set Target Port target-port <type>
exit Exit from current mode exit
show Show Mirror Settings show
SWH(config-mirror)#
Prompt
Command & Parameter
Description
SWH(config-
mirror)#
port <mirror_port_list>
To enable or disable Target Port’s mirroring
on Source ports. Both ingress (incoming) and
egress (outgoing) traffic will be copied to the
target port.
