Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 7 / 74

7
Siemens Building Technologies
Fire Safety & Security Products 08.2006
Liability claim
–
Do not connect the device if any parts are missing or damaged.
–
Do not make any changes or modifications to the device that are not mentioned
in this manual and that have not been approved by the manufacturer.
–
Use only spare parts and accessories that have been approved by the
manufacturer.
Damage during transport
–
Keep the packaging material for future transportation.
–
Do not expose the device to mechanical vibrations or shocks.
Cable damage due to mechanical load
When connecting the cables, do not apply tensile force and make sure not to bend
or damage them.
Damage due to unsuitable mounting location
–
The environmental conditions recommended by the manufacturer must be
observed. See Section: 4 Technical data.
–
Do not operate the device close to sources of powerful electromagnetic
radiation.
–
Do not operate the device in excessively dusty places.
–
Do not operate the device where it is exposed to mechanical vibrations.
Damage to the device due to overvoltage
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the power supply unit/type label. See
Section: 4 Technical data.
Danger of electrical shock and damage to the device
Electrical grounding must meet the customary local safety regulations.
Data loss after update
Make sure to backup all data before updating the device.
Electric shock or fire hazard
Never insert objects through the openings on the device.
Danger of electrical shock during maintenance
Always disconnect the power cable and other cables from the main power supply
before performing maintenance.
Danger of electrical shock while cleaning the device
–
Disconnect the device from the mains supply before cleaning it.
–
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.