Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 58 / 74

58
Siemens Building Technologies
Fire Safety & Security Products 08.2006
12.3.1 Direct control via CKA48xx/CKA32xx
NOTE
We recommend following interfacing:
z
RS485 connection, 9600 baud, even parity, 8 data bits, 1 stop bit
z
Camera addressing is 0-127
Tested using Siemens keyboard CKA4820
Operation User
keyboard
action
Notes
Pan Left (variable speed) Pan Left
Pan Right (variable speed) Pan Right
Tilt Up (variable speed) Tilt Up
Tilt Down (variable speed) Tilt Down
Focus Near Focus Near
Focus Far Focus Far
Zoom In Zoom In
Zoom Out Zoom Out
All Stop Cam + Stop
OSD Setup On Cam + F1 Also available by Pos 65. When opening the OSD with “Cam” + F1 it is necessary to exit
the OSD with “Cam” + F10. It is possible to exit the OSD menu by selecting the EXIT
option in the OSD main menu. If so, the keyboard will remain in menu mode (green LED
flashing). It is necessary to use “Cam” + F10 to exit menu mode on the keyboard in that
case. Also Solaris™ will automatically exit the OSD mode after approx. 2 minutes of no
activitiy. In this case it is necessary to use “Cam” + F10 to exit menu mode on keyboard.
AutoFocus On Cam + F2
Flip Cam + F3
Toggle Colour / B&W Cam + F4 This function will toggle the automatic D/N function if preset.
Pattern Record Cam + F6 Enters pattern record mode for pattern 1 (direct).
Pattern Stop Cam + F7 Ends pattern record mode for pattern 1 (direct).
Pattern Save Cam + F8 Ends pattern record mode pattern 1 and saves (direct).
Pattern Test Cam + F9 Recalls the last pattern recorded (direct).
Exit OSD menu Cam + F10
Store Preset 1-64 [1…64] Mem
Recall Preset 1-64 [1…64] Pos
Enter OSD menu 65 Pos Also available using Cam+F1.
Exit OSD 66 Pos Also available using Cam+F10.
Go to Home position 67 Pos Home is Preset 1 on Solaris™.
Flip 68 Pos
Start Auto Patrol 69 Pos Starts preset tour.
BLC On 70 Pos
BLC Off 71 Pos
One Push White Balance 72 Pos
One Push AutoFocus 73 Pos
Display Version 74 Pos Displays Dome and XTU firmware versions.
Setup privacy zone 76 Mem
IR Cut Filter On ("Night
Mode") 77 Pos
IR Cut Filter Off ("Day Mode") 78 Pos
Stop Scan 83 Pos Stops current sequence / tour / pattern.
Random Scan 84 Pos Starts random preset tour.
Frame Scan 85 Pos Starts preset sequence (fixed speed, uniform dwell time).
Auto Scan 86 Pos Starts preset tour.
Record / Recall Pattern 1 87 Mem / Pos Starts recording or playing Pattern 1.