Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 47 / 74

47
Siemens Building Technologies
Fire Safety & Security Products 08.2006
11.1.3 The Presets, Tours and Patterns menu
A Preset is a stored, fixed camera position that you can return to by entering a
preset number on the controller keyboard. The Solaris™ Dome can store up to 99
presets.
A Preset Tour is a pre-configured sequence of presets that the Solaris™ Dome
will move between continuously. The Solaris™ Dome can store up to 4 tours of 32
steps each. Each step can have an associated speed and dwell time.
A Pattern is a recorded sequence of Solaris™ Dome movements that can be
played back repeatedly. The Solaris™ Dome can store four patterns, the length of
which can be up to several minutes.
Presets Use this item to review, edit, name and store presets. You can also store
preset text, it will remain on the OSD until you move to another pan, tilt or
zoom location.
Preset Tours This menu item is used to recall and edit preset tours.
Patterns Use this menu to recall a previously recorded pattern or record a new one.
Inactivity Return This menu allows you to select an operation that will start after a predefined
period of keyboard inactivity.
Assign Presets This menu will allow you to assign any of the four tours or the pattern to a
preset. This means that they can be started by recalling the preset.
Within the assign preset menu, it is also possible to assign presets to alarms
that can be recalled when an alarm is triggered.
Two sub-menus will allow you to assign a preset to any of the 8 alarms
NOTE
A random tour is a tour that consists of the steps used in tour 1, but are replayed in a random order.
This helps prevent potential criminals from studying and learning the movement of a traditional tour.