Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 53 / 74

53
Siemens Building Technologies
Fire Safety & Security Products 08.2006
11.1.7 The OSD menu
The OSD menu is used to set up what information is displayed on screen during
routine operation. The display is dynamic, and items such as alarms are only
displayed when they are relevant. New items will overwrite existing items at the
same location in the following order of priority:
1. Receiver address
2. Alarm name
3. Information message
4. Preset number
5. Preset name
6. Sector name
7. Camera number
8. Camera name
9. Status
Camera details This allows you to set up a name and number for the camera (note that
the camera number is just an identifier for the camera and not the
receiver address).
OSD configuration This allows you to choose which items to display, and where to locate
them on-screen. The screen is divided into left and right and 12 lines
vertically (1 = top; 12 = bottom).
OSD MENU
SET CAMERA DETAILS
CONFIGURE OSD
BACK
OSD CONFIGURATION
CAMERA NUMBER...Off/ 1-12 Left / 1-12 Right
CAMERA NAME... Off/1-12 Left / 1-12 Right
PRESET NUMBER...Off/ 1-12 Left / 1-12 Right
PRESET NAME...Off/ 1-12 Left / 1-12 Right
SECTOR NAME... Off/1-12 Left / 1-12
ALARM NAME... Off/1-12 Left / 1-12 Right
STATUS...Off/ 1-12 Left / 1-12 Right
BACK
CAMERA DETAILS
RECEIVER ADDRESS
1
CAMERA NUMBER...001-999
CAMERA NAME²
CLEAR NAME
HELP
BACK
Fig. 26 The OSD menu
1
) Setting is read only, not editable.
2
) “CAMERA NAME” can have up to 24 characters of text assigned to it.
If blank, the whole line is highlighted, press ‘Set’ to add characters)