manualshive.com logo in svg

Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 39 / 74

Share
Download
Siemens Solaris CCDS1415-DN Configuration Manual Download Page 39

 

39

 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

08.2006

 

10 

Configuration of the External Termination Unit 

 

Once the physical installation of the XTU is complete it needs to be configured to 
use the correct telemetry protocol and receiver address to identify itself correctly. 
To allow this to be carried out, the XTU is fitted with a LCD display and a simple 
keyboard. 
By default, the display indicates the receiver address, the current protocol and the 
interface that is in use. However, the keypad can be used to control a menu 
system that provides access to a number of settings. 

 

Fig. 17 

XTU keyboard 

10.1  Keys and their functions 

 

 

Keys Functions 

 

Used to enter a menu or select an option. 

 

 

Scrolls through the available options. 
 

 

 

Navigates between options. 

 

 

NOTE 

The left key allows you to go back up a level in the menus. 

 

 

 

 

Switches the display into ‘live video’ mode for test purposes. 

 

 

 

NOTE 

Camera control is not possible when in LCD ‘live video’ mode.

 

 

 

 

Press the 

 button when in ‘live video’ mode to enter pan and tilt mode, where 

the Dome can be controlled via the XTU. Pressing it again allows zoom and focus, 
pressing a 3rd time switches back to ‘live video’ mode. 

Pressing the

 

 button will exit this mode; alternatively this mode will exit after 2 

minutes of inactivity. 

 

 

 

 

 

 

NOTE 

Whilst in this mode, pressing the Up or Down keys will alter the brightness of the LCD display. 

 

 

 

Summary of Contents for Solaris CCDS1415-DN











































































Reviews:

No comments