manualshive.com logo in svg

Siemens Solaris CCDS1415-DN, Configuration Manual, Page: 25 / 74

Share
Download
Siemens Solaris CCDS1415-DN Configuration Manual Download Page 25

 

25

 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

08.2006

 

6. 

Lock the Dome bracket into position by back-tightening the locknut and 
locking it against the face of the Dome bracket. Hand tight will be sufficient. 

 

 

8.5 

Cat5 cable assembly and disassembly 

 

Solaris™ is supplied with a 10 m preassembled Cat 5 cable. In some cases, it may 
be necessary to change the cable (for a shorter cable or to replace a damaged 
cable, for example). It is very important that the cable assembly is assembled / 
disassembled in the following manner, to ensure a watertight seal between the 
connector and the Dome unit. 

 

 

 

 

 

 

IMPORTANT 

The Solaris™ Dome will 

not

 be fully water protected if these 

vital

 checks are 

not made prior to finalising the installation. 

 

 

 

 

 

 

1 

Label 

2 

Seal 2 

3 

Seal 1 

4 

Connector 

5 

Spring-clip 

 

Summary of Contents for Solaris CCDS1415-DN











































































Reviews:

No comments