SIWAREX WP251
Manual, 12/2015, A5E37203357A
179
Command lists
10
10.1
Overview
The commands for the electronic weighing system described here can be transmitted by
several interfaces:
●
by the Operator Panel via the controller to the SIWAREX module
●
by the operator panel directly to the SIWAREX module via Modbus
●
by SIWATOOL directly to the SIWAREX module
●
by the digital inputs after corresponding assignment in data record DR 7
If an issued command is not accepted by SIWAREX, the cause of the rejection is always
substantiated with a corresponding data/operating error.
Detailed descriptions of the commands can be found in the following command lists:
→ Table 10
-1 Table 10-1 Service commands (Page 180)
→ Table 10
-2 Table 10-2 Protocol commands, statistics, logbook (Page 181)
→ Table 10
-3 Table 10-3 Trace commands (Page 181)
→ Table 10
-4 Table 10-4 Display changeover for DR 34 and SecureDisplay (Page 181)
→ Table 10
-5 Table 10-5 Scale commands (Page 183)
→ Table 10
-6 Table 10-6 Scale commands (Page 183)
See also
Command lists (Page 179)
10.2
Command lists
The commands for the electronic weighing system described here can be transmitted by
several interfaces:
●
by the Operator Panel via the controller to the SIWAREX module
●
by the Operator Panel directly to the SIWAREX module
●
by SIWATOOL directly to the SIWAREX module
●
by the digital inputs after corresponding assignment in data record DR 7
Summary of Contents for SIWAREX WP251
Page 28: ...Mounting 5 3 Mounting on the SIMATIC S7 1200 SIWAREX WP251 28 Manual 12 2015 A5E37203357A ...
Page 212: ...Technical specifications 13 3 Approvals SIWAREX WP251 212 Manual 12 2015 A5E37203357A ...
Page 218: ...List of abbreviations B 1 List of abbreviations SIWAREX WP251 218 Manual 12 2015 A5E37203357A ...
