Siemens SIWAREX WP251, Manual

Page: 181 / 220

Command lists
10.2 Command lists
SIWAREX WP251
Manual, 12/2015, A5E37203357A
181
Com-
mand
code
Command Description Pro-
tected
83 Check Calibration The command calculates the theoretical digit values in relation to the cali-
bration weights using the load cell parameters from data record 10 and the
calibration weights 0, 1 and 2 from data record 3. These theoretical digits
are output in data record 4. The function can be used to compare the cali-
bration digits in data record 3 that were determined during a calibration
with calibration weights (commands 60, 61, 62) with the theoretically ex-
pected digits.
443 Reset min/max pointer Resets the weight min/max pointer in DR 38 P
Table 10- 2 Protocol commands, statistics, logbook
Com-
mand
code
Command Description Protected
401 Generate protocol Log current parameters relevant to the calibration
405 Erase protocols Delete all logs P
440 Erase log book Delete the logbook. Only permitted in non-calibrated state. P
Table 10- 3 Trace commands
Command
code
Command Description Protected
451 Trace ON Start trace recording
452 Trace OFF Stop trace recording
453 Single Trace Element Create single trace (current state)
454 Reset Trace Memory Delete trace memory
Table 10- 4 Display changeover for DR 34 and SecureDisplay
Command
code
Command Description Protected
701 High resolution on Activate high resolution (factor 10) of the weight value
on the main display (DR 34) and the SecureDisplay
for 5 s.
705 Display Tare Process Display current tare weight on the main display (DR
34) and the SecureDisplay.
710 Display standard weight Display standard gross/net weight display on the
main display (DR 34) and the SecureDisplay.
721 Display single set point Display currently set point setting from DR 20 on the
main display (DR 34) and the SecureDisplay for 5
seconds.