Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Page: 41 / 118

Configuration
41
Siemens AG
06.2010
Fig. 34 Motion Detection Zone menu
Select Activates highlighted blocks to detect motion.
Clear Deactivates highlighted blocks so that they will not detect motion.
Reverse Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All Activates all blocks to detect motion.
Clear All Deactivates all blocks so that they will not detect motion.
Reverse All Activates inactive blocks and deactivates active blocks.
OK Accepts changes and closes Zone setup.
Cancel Exits Zone setup without saving changes.
You can control excessive event logging and remote notification of motions detected
after the motion dwell time by adjusting the motion ignoring dwell intervals.
Highlight the box beside Motion Ignoring Interval and press the button.
Î
A list of intervals ranging from 1 to 5 seconds or "Never" appears.
Î
The DVR will not log and notify motion events occurred during the preset interval
range.
NOTE
The record action for motion events will not be affected by the Motion Ignoring function.
Highlighting Daytime Setup and pressing the button allow you to set up the
Daytime range.
Fig. 35 Daytime Setup screen
1. Highlight the box beside Daytime and press the button.
2. Use the Up and Down arrow buttons to set the Daytime range.
Î The DVR will consider the remaining time range as the Nighttime.
3. Highlight the Actions tab.
Î
The Motion Detection Actions screen displays.