Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download Page 73

Page: 73 / 118

Configuration

Siemens AG

06.2010

Highlight

Use Daylight Saving Time

and press the button.

Pressing the button toggles between On and Off.

Highlight the

Holiday

tab, and the

Holiday

setup screen appears

Fig. 76

Holiday setup screen

Holiday

You can set up holidays by highlighting "+" and pressing the button.

The current date appears.

Highlight the month and day and change them by using the Up and Down arrow
buttons.

Press the button to add the date.

Dates can be deleted by highlighting the beside the date and pressing the

button.

NOTE

Holidays that do not fall on the same date each year should be updated once the current year’s
holiday has passed.

Highlighting the

Time Sync.

tab causes the

Time Sync.

screen to display. You can

set up time synchronization between the DVR and standard time servers that are
available in most time zones and countries, or between the DVR and another DVR.

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands