Configuration
40
Siemens AG
06.2010
You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Highlighting the box under the
Min. Blocks
heading and
pressing the button allow you to adjust the minimum number of detection blocks
for
Daytime
and
Nighttime
independently. Smaller numbers provide greater
sensitivity because fewer detection blocks must be activated.
Fig. 32
Motion Detection Min. Blocks screen
Turning
Zone View
On will allow you to observe how the DVR is reacting to motion.
When in the motion viewing mode, the detection zone of video will be displayed in
green. Any detected motion within the zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a
doorway. Highlight the box under the
Zone
heading, and press the button.
Î
The
Motion Detection Zone
screen displays.
Fig. 33
Motion Detection Zone screen
The
Motion Detection Zone
screen is laid over the video for the selected camera.
You can set up motion detection zones by selecting or clearing blocks.
NOTE
You can set up motion zones one block at a time in groups of 4 individual block groups. A block group
is positioned within the image area using the Up and Down arrow buttons, and individual blocks within
the block groups are selected or cleared using the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has
the following functions:
Summary of Contents for SISTORE AX4 Lite 1000/100
Page 6: ......
Page 114: ...Appendix 114 Siemens AG 06 2010 11 5 Map of screens ...