Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download Page 33

Page: 33 / 118

Configuration

Siemens AG

06.2010

Fig. 22

Port Numbers setup screen

Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number.

The factory default port settings are:

Remote Admin:

8200

Remote Callback:

8201

Remote Watch:

8016

Remote Search:

10019

NOTE

The system restarts automatically after changing the port settings.

NOTE

Do NOT use the same port number for two different programs, otherwise, the DVR cannot be
connected with the PC running RAS or Web Client.

NOTE

When changing the port settings, you must change the port settings on the PC running RAS or Web
Client as well. Refer to the RAS manual for details.

Selecting "DHCP" from the

Type

and highlighting the

Save

button reads the

current IP address of the DVR configured by DHCP (Dynamic Host
Configuration Protocol) network.

Fig. 23

LAN (DHCP) setup screen

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands