Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download

Page: 110 / 118

Appendix

110

Siemens AG

06.2010

11.3.2 Web Play Mode

WebPlay is a remote web search program that allows you to search recorded video
on the remote DVR.

NOTE

The remote site connection in the Web search mode will automatically be disconnected if there is no
activity for 30 minutes.

Click the button to log out the Web Client program.

Click the button to access to the web monitoring mode.

Position the mouse pointer on the WebPlay logo to see the version of the Web

Client program.

The DVR information window displays the time information of recorded data on

the remote DVR and login information of Web Client.

Click the

button to blur, sharpen, equalize and interpolate playback images.

Click the

button to zoom out or zoom in the recorded image. Click the

button to adjust the brightness of the recorded images.

NOTE

Image processing works only in the pause mode.

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands