Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download Page 61

Page: 61 / 118

Configuration

Siemens AG

06.2010

Change the number by highlighting it and using the Up and Down arrow buttons
to increase and decrease the number.

The PTZ ID number can be set from 0 to 256.

Highlight the

Setup…

box and press the button.

The

Port Setup

window appears.

Fig. 59

Port Setup window

Configure the port’s setting based on the PTZ camera manufacturer’s
instructions.

You can save your

Camera

changes by highlighting

and pressing the

button.

Selecting

Cancel

exits the screen without saving the changes.

7.11.2 Audio

Setup

The DVR can record up to four audio inputs.

Highlight

Audio

in the

Devices

menu and press the button.

A list of cameras appears.

You can select which cameras associated with that audio input.

Highlight

Enable Audio-Out

and press the button. This toggles between

enabling and disabling audio out. You can also enable and disable audio out
during live monitoring and playback in full screen mode.

Fig. 60

Audio Setup screen

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands