Configuration
38
Siemens AG
06.2010
NOTE
For the
Alarm-Out
action, the alarm output and beep you select should be set to the Event mode in
the
Alarm-Out
setup screen (
Schedule
tab).
6.
Highlight the desired box under the
Notify
heading, and press the button.
Î
The
Alarm-In Notify
menu appears.
Fig. 29
Alarm-In Notify menu
You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the button.
7.
Highlight
OK
and press the button to accept your changes.
NOTE
For the
Notify
action, the notify item you select should be enabled in the
Notification
setup screen
and the DVR should be registered in the RAS (Remote Administration System).
8.
Highlight the desired box under the
PTZ
heading, and press the button.
Î
A list of PTZ presets appear.
9.
Select the preset position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input on the associated alarm input.
Î
You can save your
Alarm-In
changes by highlighting
Save
and pressing .
Î
Selecting
Cancel
exits the screen without saving the changes.
Summary of Contents for SISTORE AX4 Lite 1000/100
Page 6: ......
Page 114: ...Appendix 114 Siemens AG 06 2010 11 5 Map of screens ...