Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download Page 117

Page: 117 / 118

Appendix

117

Siemens AG

06.2010

Email Test Related

Number Description

100

No error.

101

TCP socket creation failed.

102

Invalid DNS server address.

103

Invalid DNS or SMTP server address.

104

Connection error to the SMTP server (SSL disabled).

105

Connection error to the SMTP server (SSL enabled).

106

Connection rejected by the SMTP server.

107

SMTP protocol error (STARTTLS).

108

SMTP protocol error (HELO) – Without user authentication.

109

SMTP protocol error (EHLO) – With user authentication.

110

SMTP protocol error (AUTH LOGIN).

111

SMTP protocol error (Parameter delivery of AUTH LOGIN
protocol failed; User name).

112

SMTP protocol error (AUTH LOGIN failed – Wrong user ID
and password).

113

SMTP protocol error (MAIL FROM:<mail address>).

114

SMTP protocol error (CPT TO:<mail address>).

115

SMTP protocol error (DATA).

116

Connection interrupted.

117

SMTP protocol error (QUIT).

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands