Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual Download Page 93

Page: 93 / 118

Operation

Siemens AG

06.2010

Selecting located at the bottom displays the

Search

menu.

Go To

Displays the first or last recorded image, or searches by date and time (see
previous section

Go To Date/Time

for more details).

Clip-Copy

Clips a video segment and saves it (see the following

Clip Copy

section for more

details).

Zoom

Zooms the current playback image.

Use De-Interlace

Turns the de-interlace filters on.

Slow-Play

Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).

The individual playback controls at the bottom perform the following functions as
described below:

Go to the previous image

Play/Pause

Go to the next image

Fast backward play

Fast forward play

Selecting located in top-left corner exits the recording table screen.

8.7.1.3 Motion Search

Fig. 99

Motion Search screen

The

Motion Search…

can be selected from the

Search

menu while the DVR

displays the camera full screen. The

Motion Search

screen displays a list of motion

events. Use the arrow buttons to highlight the event for which you would like to see
and press the button to display the video associated with selected event on the
small search screen.

Summary of Contents for SISTORE AX4 Lite 1000/100























































































































Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands

Siemens SISTORE AX4 Lite 1000/100, Configuration & Operation Manual

Search results

Summary of Contents for SISTORE AX4 Lite 1000/100

Reviews:

Related manuals for SISTORE AX4 Lite 1000/100

Brands by name

Popular brands