manualshive.com logo in svg

Siemens Sinamics S120M, Equipment Manual, Page: 9 / 186

Share
Download
Siemens Sinamics S120M Equipment Manual Download Page 9

Introduction

1

1.1

The SINAMICS converter family

With the SINAMICS converter family, you can solve any individual drive task in the low-voltage, 

medium-voltage and DC voltage range. From converters to motors and controllers, all Siemens 

drive components are perfectly matched to each other and can be easily integrated into your 

existing automation system. With SINAMICS you are prepared for digitization. You benefit from 

highly efficient engineering with a variety of tools for the entire product development and 

production process. And you also save space in the control cabinet – thanks to the integrated 

safety technology. 
You can find additional information about SINAMICS at the following address (

http://

www.siemens.com/sinamics

).

Manual, 06/2019, 6SL3097-5AW00-0BP1

7

Summary of Contents for Sinamics S120M



























































































































































































Reviews:

No comments