Siemens SIMATIC S7 F, Manual

Page: 82 / 354

Configuration
Fail-Safe Systems
4-12
A5E00085588-03
Adding F-I/O’s via CIR
To add a new F-I/O to your System follow these steps:
•
Configure the new F-I/O within HWCONFIG according to the manual, “How to
Modify the System during Operation wth CiR (handle it like a standard module)
•
Calculate the Monitoring Time for this F-Module (see “Calculate the Monitoring
Time for Communication between the F-CPU and the F-I/O“) and use it to
update the Monitoring Time for this F-Module in HWCONFIG.
•
Modify your safety program (add safety logic, channel driver and module driver
for this module)
•
Deactivate safety mode (see “Deactivating Safety Mode“)
•
Download your safety program
•
Download your configuration via CiR
•
Activate safety mode (see “Activating Safety Mode“)
Deleting F-I/O‘s via CiR
To delete an already existing F-I/O from your System follow these steps:
•
Delete the F-I/O within HWCONFIG according to the manual, “How to Modify
the System during Operation with CiR“ (handle it like a standard module)
•
Modify your safety program (delete safety logic, channel driver and module
driver for this module)
•
Deactivate safety mode (see “Deactivating Safety Mode“)
•
Download your safety program
•
Download your configuration via CiR
•
Activate safety mode (see “Activating Safety Mode“)
Note
You can only delete an existing F-I/O via CiR if the module was added to the
system via CiR.
Changing of an exisiting configuration of an F-I/O is not possible.