manualshive.com logo in svg

Siemens SIMATIC NET PROFIBUS, Owner'S Manual, Page: 432 / 490

Share
Download
Siemens SIMATIC NET PROFIBUS Owner'S Manual Download Page 432

36

8 Appendix

Version 1.0 8/00

8.5 SIMATIC NET - Support and Training

SIMATIC Training Centers

We offer courses designed to enable you to familiarize yourself with the SIMATIC S7 automation system. 
Please contact your regional Training Center or the Central Training Center in 90327 Nuremberg, Germany. 

Internet:

http://www.ad.siemens.de/training

E-Mail:

[email protected]

SIMATIC Customer Support Hotline

Available worldwide 24 hours a day:

Nuremberg (Nürnberg)

Johnson City

Singapore (Singapur)

SIMATIC BASIC Hotline

SIMATIC BASIC Hotline

SIMATIC BASIC Hotline

Local time: Mo - Fr 8:00 to 18:00

Local time: Mo - Fr 8:00 to 17:00

Local time: Mo - Fr 8:30 to 17:30

Telephone: +49 (911) 895-7000

Telephone: +1 423 461-2522

Telephone: +65 740-7000

Fax:

+49 (911) 895-7002

Fax:

+1 423 461-2231

Fax:

+65 740-7001

E-Mail:

simatic.support@

E-Mail:

simatic.hotline@

E-Mail:

simatic.hotline@

nbgm.siemens.de

sea.siemens.com

sae.siemens.com.sg

SIMATIC Premium Hotline

(rates charged, only with SIMATIC Card)
Time:

Mo - Fr 0:00 to 24:00

Telephone: +49 (911) 895-7777
Fax:

+49 (911) 895-7001

8.5 SIMATIC NET - Support and Training

Summary of Contents for SIMATIC NET PROFIBUS











































































































































































































































































































































































































































































































Reviews:

No comments