Siemens SIMATIC MV540 H Operating Instructions Manual Download Page 168

Page: 168 / 238

Process interfacing via an automation system (PLC, PC)

9.8 SNMP

SIMATIC MV500

168

Operating Instructions, 06/2018, C79000-G8976-C494-01

Scope of performance of the optical reader as an SNMP agent

The optical reader supports data query in the following SNMP versions:

●

SNMPv1 (standard)

For the optical reader, only SNMP variables from the following MIBs are supported:

●

LLDP-MIB

●

Standard MIB II (according to RFC1213)
–

Group "System"

–

Group "Interfaces"

Write access is permitted only for the following MIB objects of the "System" group:

●

sysContact

●

sysLocation

●

sysName

For all other MIB objects / MIB object groups, only read access is possible for security

reasons.
Traps are not supported by the optical reader.

Access permissions using community names

The optical reader uses the following community strings to control the access rights to the

SNMP agent:

Table 9- 62 Access rights in the SNMP agent

Type of access

Default community string

Read access

public

Read and write access

private

NOTICE
Change community string
Note that the default community string is generally known and therefore does not provide

effective protection.
To make sure that no unauthorized persons can access the device, we recommend that

you change the community string when the device is first set up.

Summary of Contents for SIMATIC MV540 H















































































































































































































































Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands

Siemens SIMATIC MV540 H, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands