Siemens SIMATIC MV540 H Operating Instructions Manual Download Page 65

Page: 65 / 238

Mounting

5.2 Mounting with built-in ring light and mini-lens

SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01

Proceed as follows to mount the SIMATIC MV540 optical reader with built-in ring light, mini-

lens and protective lens barrel:
1.

Remove the protective cap for the lens threads.

Mount the ring light/ring light holder

③

–

Make sure that the ring light holder is aligned correctly when it is mounted.

–

Fasten the ring light holder

③

with the three hexagon socket screws

④

onto the

reader (≤ 0.45 Nm).

Screw the desired lens

①

into the lens mount of the reader

②

Insert the micro SD adapter

⑤

into the reader interface provided

②

If needed, insert a micro SD card into the adapter

If needed, replace the attachment of the built-in ring light.
The attachments can be easily removed from the ring light or placed on it. Ensure that the

attachment is correctly aligned.
You can find detailed information on the ring light attachments in the following section.

Screw the D65 protective lens barrel (article number 6GF3540-8AC11)

⑥

onto the

reader

②

Summary of Contents for SIMATIC MV540 H















































































































































































































































Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands

Siemens SIMATIC MV540 H, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands