Siemens SIMATIC MV540 H Operating Instructions Manual Download Page 36

Page: 36 / 238

Image processing

3.1 Code reading (1D/2D codes)

SIMATIC MV500

Operating Instructions, 06/2018, C79000-G8976-C494-01

3.1.2.3

QR codes

Note
Maximum code dimension/unsupported code types

•

Codes with a maximum code dimension of 89 x 89 can be read.

•

The following code types are not supported: Micro QR code, Macro QR code.

The recognition process of the optical reader allows reliable and fast reading of printed QR

codes of good quality.

Range of application

●

The range of imaging sizes ranges from 5 to 35 pixels per cell. The range is static.

●

The codes can have any alignment in the image.

●

The code can be printed both dark on a light background and light on a dark background.

●

The viewing angle of the optical reader to the surface can be between 70° and 90°.

●

The diameter of the cells must be the same size over the entire code field.

●

The contrast between cells and the background must be approximately the same over the

entire code field.

●

The image background must have a homogeneous brightness, for example no texture

such as stripes.

3.1.2.4

PDF417 codes

Note
Unsupported code types
The following code types are not supported: Truncated PDF417, Macro PDF417, Micro

PDF417.

The recognition process of the optical reader allows reliable and fast reading of printed

PDF417 codes of good quality.

Summary of Contents for SIMATIC MV540 H















































































































































































































































Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands

Siemens SIMATIC MV540 H, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV540 H

Reviews:

Related manuals for SIMATIC MV540 H

Brands by name

Popular brands