Application planning
4.3 Setting up power segments
ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
37
Setting up power segments
Up to three power segments per station are possible. Supply per power segment:
Power segment 1 (always present):
●
Alternative 1: Supply voltage from the interface module
●
Alternative 2: Supply voltage from the power supply module before the interface
interface module
,2PRGXOHV
3RZHUVHJPHQW
30ORDG
FXUUHQW
VXSSO\
36
,0
36
LQW
'&9
①
System power supply:
Power supply (PS) integrated power supply module of the interface module (PS
int
)
for supplying the I/O modules via the backplane bus
②
Backplane bus
③
Load power supply:
Power module (PM) or SITOP for supplying the modules (PS, interface module, I/O
modules) and, where applicable, the sensors and actuators
Figure 4-2
Combined power from PS power feed + IM power feed in power segment 1
Summary of Contents for simatic ET 200MP
Page 4: ...Preface ET 200MP Distributed I O System 4 System Manual 01 2013 A5E03723484 01 ...
Page 8: ...Table of contents ET 200MP Distributed I O System 8 System Manual 01 2013 A5E03723484 01 ...
Page 118: ...Service Support ET 200MP Distributed I O System 118 System Manual 01 2013 A5E03723484 01 ...
Page 126: ...Index ET 200MP Distributed I O System 126 System Manual 01 2013 A5E03723484 01 ...
