CPU module
Hardware - SIMADYN D
3-3
Edition 03.2001
3
The size of the software to be loaded in the memory module (compressed to
approx. 50%) and the size of the available program memory is displayed in
CFC under the following menu item:
Target system \ Load \ Info
The program is loaded in a program memory module
MS5, 2 Mbyte Flash-EPROM, 8 Kbyte EEPROM
MS51, 4 Mbyte Flash-EPROM, 8 Kbyte EEPROM
A
MS51
memory module which could be used with the PM5 may only be
used up to approx. 50 % so that the expanded code can be accepted on the
PM5.
An RS 232 interface (V.24) with service protocol DUST1 with
19.2 kbd
is
permanently installed in
connector X01
(9-pin sub-D socket). It is used to:
•
test and commission the user program
(using CFC or "IBS")
•
loading the user program from the PC (only in this module)
The connections available at the 10-pin
connector X5
(8 signals and
ground) are functionally sub-divided into 2 groups, each with 4 inputs:
Pins
Function
1...4
Bin. input 1...4 Absolute
value
encoder 1
Incremental encoder 1
5...8
Bin. input 5...8 Absolute
value
encoder 2
Incremental encoder 2
A plug-in socket is provided on the PM5 for each of the 6 functions. A
function is not selected by configuring, but by inserting a coded connector
into the associated socket.
The available connections can therefore be used for one
of the following
combinations of functions:
•
8 binary inputs or
•
4 binary inputs and 1 absolute value encoder or
•
4 binary inputs and 1 incremental encoder or
•
1 absolute value encoder and 1 incremental encoder or
•
2 absolute value encoders or
•
2 incremental encoders
Program size
MS5, MS51
Serial service
interface
Inputs
Selection
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
+86-755-8660-6182
