Technology subrack
Hardware - SIMADYN D
7-3
Edition 03.2001
7
•
2 analog outputs
•
5 analog inputs
•
2 binary outputs
•
4 bi-directional binary inputs/outputs
•
8 binary inputs, of which a maximum of 4 can be used to call-up interrupt
tasks
•
2 incremental encoder connections with zero pulse
•
2 coarse pulse connections to suppress zero pulses;
rough pulses can be optionally used as binary input
•
2 absolute value encoder connections (SSI/EnDat interface);
absolute value encoder connection 2, optionally to serial interface 2!
•
Serial interface 1 for
−
download and service with DUST1 protocol(RS 232) or
−
USS protocol (RS 485)
•
Serial interface 2 (RS 485), optionally to absolute value encoder
connection 2 for
USS (master or slave) or peer-to-peer
•
The module is configured by
downloading
data into the permanently
inserted flash EPROM (the EPROM is soldered-in)
•
MASTER DRIVES operator control panel
OP1S and SIMOVIS can be
connected via USS slave for parameterization (for applications without
MASTER DRIVES BASE-BOARD (CU), e. g. in the SRT400)
•
2*T400 can be used in the SRT400 subrack
•
Selectable
T400
synchronizing
from the BASE- or COM BOARD,
synchronizing signals can be output to the BASE- and COM BOARD;
•
Dual port RAM interface to MASTER DRIVES
BASE BOARD, CU and
interface to the dual port RAM on a communications module (COM
BOARD CB)
•
32-bit RISC processor, 32 MHz
•
2Mbyte Flash
for compressed program code.
•
4Mbyte DRAM
for the de-compressed (unzipped) program which can be
run
•
32 kbyte permanent change memory (
EEPROM
)
(e.g. for fuzzy control)
•
4 kbyte dual port RAM
Inputs/outputs
Functional features
Features,
electronics
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
+86-755-8660-6182
