Siemens Set CEM CERT, Operating Instructions Manual, Page: 72 / 128

Operation
8.4 Menu-based operation
Set CEM CERT
70
Operating Instructions, 06/2021, A5E34491309-12
The keys or display elements have the following meaning:
Operator control Key Meaning
F4 Opens the Details of last calibration (Page 73) menu
Touch-
sensitive Selection of the calibration: Zero point or calibration gas calibration
Touch-
sensitive Starts the manual calibration
Touch-
sensitive Display of the current setpoint and actual values.
If a full-scale value calibration was chosen, the input area for the setpoint can be
opened and a new setpoint value entered by touching this area.
Touch-
sensitive Button for accepting the calibration.
This button is first displayed after the calibration has been started.
Touch-
sensitive Button for canceling the calibration.
This button is first displayed after the calibration has been started.
The meaning of the remaining keys and display elements is described in the section
Standard keys/touch-sensitive elements (Page 50).
Display element Meaning
Shows the status of the current component. This changes during the calibration.
Display of the currently chosen device (type and status) as well as the current component.
Input of the setpoint value for the calibration gas.
If the calibration gas calibration is selected, an additional button appears in the menu.
Touching the button <Change concentration> opens an input dialog. Here, a new
setpoint value can be entered in the device and read out again.