Siemens Set CEM CERT, Operating Instructions Manual, Page: 14 / 128

General information
2.3 Notes on use
Set CEM CERT
12
Operating Instructions, 06/2021, A5E34491309-12
2.3 Notes on use
2.3.1 Requirements for safe use
In terms of safety, this system left the factory in perfect condition. In order to maintain
this condition and to ensure safe operation of the system, adhere to the instructions in
this instruction manual and all safety-relevant information.
Also observe the notices and symbols on the device. Do not remove any notices or
symbols from the system. Always keep the notices and symbols in a completely legible
condition.
Only qualified personnel are permitted to operate this measuring system or carry out
interventions on the system.
Qualified personnel for the purpose of these instructions or the safety notices on the
product itself are persons that are familiar with the setup, installation, commissioning
and operation of the product. These persons have the following qualifications:
• As configuration personnel, they are familiar with the safety concepts of automation
engineering
• As operating personnel, they are trained to handle automation engineering equipment
and know the content of this manual related to operation
• As commissioning and service personnel, they have had training that qualifies them to
repair this type of automation engineering equipment or are authorized to
commission, ground and mark electric circuits and systems/devices in accordance
with safety engineering standards.