Siemens Set CEM CERT, Operating Instructions Manual, Page: 109 / 128

Set CEM CERT
Operating Instructions, 06/2021, A5E34491309-12
107
Technical specifications
11
System design
Color RAL 7035
Weight Approx. 160 kg (353 lbs.)
Sheet-steel cabinet/frame
Dimensions (with base)
1)
Indoor installation
2100 x 800 x 800 mm; 83" x 31 1/2" x 31 1/2" (H x W x D)
GRP cabinet
Dimensions (with base)
1)
Outdoor installation
2060 x 900 x 800 mm; 81" x 35 1/2" x 31 1/2" (H x W x D)
Explosion protection classification Installation outside the Ex zone
Degree of protection IP 54 (avoid direct sunlight when installed outdoors)
Operating position Vertical
Sample gas cooler 2-stage
Calibration
• ULTRAMAT 23
• ULTRAMAT 6, OXYMAT 6
Semi-automatic; AUTOCAL at 24-hour intervals
Fully automatic
Analyzers ULTRAMAT 23, ULTRAMAT 6, OXYMAT 6 and SIPROCESS UV600
For further technical details of the analyzers, refer to the
corresponding operating instructions. This information is included in
section 4 of the overall documentation with your delivery.
1) A space of 500 mm (20") must be provided on the right or left side for the cable inlet and the connection of the
heated sample gas line.
Climatic conditions
Permissible ambient temperature
• During operation
• With heating in sheet-steel cabinet
• With heating in GRP cabinet
• With air conditioning
+5 °C ... +40 °C, standard; conforms to EN 15267 -3
-5 °C ... +45 °C
-15 °C ... +40 °C
Max. +52 °C
Permissible ambient humidity 75% RH (relative humidity) annual average, non-condensing
The conditions of EN 15267-3 must be observed.