Siemens Set CEM CERT, Operating Instructions Manual, Page: 70 / 128

Operation
8.4 Menu-based operation
Set CEM CERT
68
Operating Instructions, 06/2021, A5E34491309-12
The keys or display elements have the following meaning:
Operator control Key Meaning
F2/F3/F4 Opens the "Graph (Page 63)" menu for displaying all measured values of the
selected analyzer
Touch-
sensitive Input of the day of week for the AUTOCAL
Touch-
sensitive Input of the daily start time for the AUTOCAL
Touch-
sensitive Manual starting of an AUTOCAL for the relevant analyzer. This has no effect on
the cyclic AUTOCAL.
Touch-
sensitive This button appears while AUTOCAL is running. Touching the button cancels
the AUTOCAL.
Touch-
sensitive Opens the "Component calibration (Page 69)" menu for the chosen component.
A touch-sensitive button is displayed for each component present in the chosen
device.
The meaning of the remaining keys and display elements is described in the section
Standard keys/touch-sensitive elements (Page 50).
Display element Meaning
This symbol appears in the display line at the top as soon as AUTOCAL runs. This is visible
from every menu.
Display of the currently chosen device (with status and type).
During a calibration, the device status changes to "Function check"
Shows the remaining time until the start of the next AUTOCAL. If the set time has been
reached, the output for starting the AUTOCAL is activated for 10 seconds. This can be
observed on LED "AUTOCAL started".
Display of a running AUTOCAL