Siemens Set CEM CERT Operating Instructions Manual Download Page 28 | Manualshive

Page: 28 / 128

Siemens Set CEM CERT Operating Instructions Manual Download Page 28

Installation

5.2 Installing the measuring system

Set CEM CERT

26

Operating Instructions, 06/2021, A5E34491309-12

5.2

Installing the measuring system

NOTICE

Inability of system to function

Make sure that the material is not damaged during installation.

The control cabinets are designed for upright mounting on a base plate or base.
Therefore, please ensure a suitable base surface.

Use lifting equipment designed for the weight of the system (approximately
200 to 400 kg depending on components) for installing the Set CEM CERT system.
Generally, only the lifting eyes on the top of the base frame are to be used for lifting the
cabinet.

When the device is stationary, secure it all around to prevent it from falling over.
Mounting brackets are provided on the base frame of the cabinet for this purpose.

«
...
26
27
28
29
30
...
»

Summary of Contents for Set CEM CERT

































































































































Reviews:

No comments