Siemens Set CEM CERT, Operating Instructions Manual, Page: 13 / 128

General information
2.2 Safety information
Set CEM CERT
Operating Instructions, 06/2021, A5E34491309-12
11
DANGER
Electric shock due to electrical voltage
This system is operated with electric current. This inevitably produces dangerous
voltages that, if contacted, may result in death or injuries.
• Before working on the system, disconnect it from the power supply system and
secure it against being inadvertently connected again.
• When the system is in normal measuring mode, ensure that no conductive parts are
openly accessible.
NOTICE
Manipulation of the system
Physical access to the system allows undesired manipulations of the system to take
place. As a result of this, the system can lose its measuring characteristics and become
unusable.
• Make sure that the system is installed in a protected area that only authorized
persons can access.
• If no settings have to be made, lock the system to prevent unauthorized or
unintentional access.