Siemens SENTRON PAC2200CLP, Product Manual, Page: 70 / 130

Commissioning
6.3 Parameterizing the device
PAC2200CLP
68
Equipment Manual, 06/2021, L1V30820585B-02
Selection Range Factory setting
UNIT Selects the type of cumulative power and the import
value that triggers the pulse when that value is
reached.
•
Counter Import Active Energy (kWh)
• Counter Export Active Energy (kWh)
• Counter Import Reactive Energy (kvarh)
• Counter Export Reactive Energy (kvarh)
Counter Import
Active Energy
(kWh)
PULSE LENGTH The "Output pulse divider" property is only visible if
"Energy pulse" is set for the "USAGE TYPE".
Length of energy pulses.
Range: 30 ms to 500 ms
100 ms
"Communication" parameter
The number of available communications interfaces can vary depending on the version of the
device.
"MODBUS TCP" parameter
Selection Range Factory setting
MAC MAC address. Read only. –
DHCP (Dynamic Host Configuration Protocol)
OFF
ON
If the DHCP is activated, network configurations are
automatically assigned. This enables automatic inte-
gration of devices in an existing network. If the DHCP is
activated, network configurations cannot be adjusted
manually.
ON
IP IP address: 000.000.000.000
Manual setting of the IP address is only possible when
DHCP is deactivated.
–
SN
(subnet mask)
Subnet address: 000.000.000.000
Manual setting of the subnet is only possible when
DHCP is deactivated
–
LIMIT
(gateway)
Gateway address: 000.000.000.000
If data exchange with an IP address which is not in the
home subnet is required, the data can be transmitted
via a gateway. Gateway interconnects different net-
works.
Manual setting of the gateway is only possible when
DHCP is deactivated.
–
PORT Modbus port: 0 to 65534 502