Siemens SENTRON PAC2200CLP, Product Manual, Page: 26 / 130

Description
2.3 Functions for delimiting third-party quantities according to §62b Par. 1 of the Renewable Energy Act
PAC2200CLP
24
Equipment Manual, 06/2021, L1V30820585B-02
2.3.2 Logbook
Important changes which could influence the measurement or the storage of data in the load
profile are recorded in this logbook. The reason, time and the OID of the affected demand
period are stored for every entry along with the counter readings for import and export at the
time of the event.
The device can store over 8000 logbook entries. In the unlikely case that all entries have been
completely filled, all subsequent measurements are marked as invalid. Since entries cannot
be edited or deleted, the device must be replaced.
The logbook can be viewed via the web server and can also be exported in CSV format.
Possible events:
Event Category Reason
LOGBOOK FULL PTB-A 50.7 rele-
vant
The maximum number of logbook entries has been reached.
No further settings for the current transformer ratio are possible.
Please note that conformance with statutory calibration regulations is no longer up-
held in this case, as the time adjustment can no longer be logged. The device must be
replaced.
PARAMETER PTB-A 50.7 rele-
vant
Setting of the current transformer ratio.
The setting for the primary or secondary value for current has been changed.
TIME SETTING PTB-A 50.7 rele-
vant
The time has been set either manually, by software via the Ethernet interface or by
means of automatic time synchronization via the SNTP server.
TIME ZONE Information Change of the geographical time zone or of the daylight saving setting.
MULTI- SYNC PTB-A 50.7 rele-
vant
The time has been set several times by less than 9 seconds within one demand period
(15 minutes).
2.3.2.1 Navigating to main menu, logbook