Siemens SENTRON PAC2200CLP, Product Manual, Page: 23 / 130

Description
2.3 Functions for delimiting third-party quantities according to §62b Par. 1 of the Renewable Energy Act
PAC2200CLP
Equipment Manual, 06/2021, L1V30820585B-02
21
Date: Shows the date currently set in the device.
Format: Format used for display.
Time: Shows the time currently set in the device.
Time zone: This must be set correctly here based on the geographical time zone. It is a
prerequisite for correct time synchronization.
Daylight saving: The setting which applies to the place of installation must be entered here.
Option Description
Auto EU Usual setting for Europe
Auto US Usual setting for USA
Off Time change is deactivated
Table For specifying custom definitions. Requires the powerconfig configuration soft-
ware V3.17 or higher, which is available free of charge.
Example of configuration for Germany:
•
Time zone: +01:00
• Daylight saving: Auto EU
SNTP:
Option Description
Active The device continually polls the configured IP address of the SNTP server to effect
synchronization (recommended setting).
BCST client The device receives the broadcasts of an SNTP server which actively distributes
these to all the subscribers in the network. Only broadcasts from the configured
IP address are accepted. If the IP address setting remains unchanged at 0.0.0.0,
every broadcast is accepted.
Off Synchronization via SNTP is deactivated.
IP:
IP address of SNTP server. If the address configuration of the device takes place via DHCP, the
IP address of the SNTP server is automatically assigned as a rule.
If an IP address was entered manually, this address is used.