Siemens SENTRON PAC2200CLP, Product Manual, Page: 63 / 130

Commissioning
6.3 Parameterizing the device
PAC2200CLP
Equipment Manual, 06/2021, L1V30820585B-02
61
8. In menu item "Views", select the sub-menu "Parameters".
The "Parameter" window is displayed.
9. In the "Properties" window, click on the "Load to PC" button.
The configuration is loaded from the device to the PC.
Parameterizing the device
The parameters are entered and changed in offline mode.
To switch between online and offline mode, click "Activate online view" in the "Options"
menu or press the "F12" key.
Set the required basic parameters.
Note the description of the parameters in chapter Parameterizing via the device menu
(Page 63).
Make use of the Online Help in powerconfig.
In order to load the parameters to the device, proceed as follows:
1.
Integrate the device in powerconfig.
2. In menu item "Views", select the sub-menu "Parameters" or alternatively press the "Ctrl" and
"Pos1" buttons simultaneously.
The "Parameter" window is displayed.
3. In the "Parameters" window, click on the "Load to PC" button.
The set parameters are loaded to the device.
4. Check the device parameters and adjust them if necessary. The parameters can only be
changed in offline mode.
More detailed information on parameterization can be found in the powerconfig Online
Help or in chapter Parameterizing via the device menu (Page 63).
5. In the "Parameters" window, click on the "Load to device" button.
The set parameters are loaded to the device.