Siemens SENTRON PAC2200CLP, Product Manual, Page: 20 / 130

Description
2.2 Measuring inputs
PAC2200CLP
18
Equipment Manual, 06/2021, L1V30820585B-02
Note
Use of connection type 1P2W
In order to obtain accurate measured values, phase L1 must be used for single-phase
operation (1P2W).
NOTICE
Connection to the wrong supply voltage can cause irreparable damage to the device.
Before connecting PAC2200CLP, it must be ensured that the local power supply conditions
match the specifications on the nameplate.
Display of measured variables on the device display and via the web server
The table below shows which measured variables are displayed on the device and via the web
server.
A list of the measured values and other parameters which can be read out via the Modbus
TCP interface can be found in the appendix in chapter Modbus TCP (Page 93).
Table 2- 2 Display of measured variables on the device display and via the web server
Measured variable Display Web
Voltage L
1-N
,L
2-N
,L
3-N
✓ ✓
Voltage L
12
,L
23
,L
31
✓ ✓
Current L
1
,L
2
,L
3
✓ ✓
Neutral current (calculated) ✓ ✓
Apparent power L1,L2,L3, ∑ ✓ ✓
Active power L1,L2,L3, ∑ ✓ ✓
Reactive power L1,L2,L3, ∑ ✓ ✓
Power factor L1,L2,L3, ∑ ✓ ✓
Line frequency ✓ ✓
Active energy tariff T1 import, L1,L2,L3, ∑ ✓ ✓
Active energy tariff T2 import, L1,L2,L3, ∑ ✓ ✓
Active energy tariff T1 export, L1,L2,L3, ∑ ✓ ✓
Active energy tariff T2 export, L1,L2,L3, ∑ ✓ ✓
Active energy import (MID register) ∑ ✓ ✓
Active energy export (MID register) ∑ ✓ ✓
Secondary active energy import (MID register) ∑ ✓ ✓
Secondary active energy export (MID register) ∑ ✓ ✓
Reactive energy tariff T1 import, L1,L2,L3, ∑ ✓ ✓
Reactive energy tariff T2 import, L1,L2,L3, ∑ ✓ ✓
Reactive energy tariff T1 export, L1,L2,L3, ∑ ✓ ✓
Reactive energy tariff T2 export, L1,L2,L3, ∑ ✓ ✓
Apparent energy tariff T1 L1,L2,L3, ∑ ✓ ✓